CONFIRM THE PART FITS
Part Information
This clutch assembly (part number 753-06281) is for lawn and garden equipment.
Clutch assembly 753-06281 engages and disengages the drive shaft. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair. Wear work gloves to protect your hands.
Frequently Used Together
- $18.55 |Â10% OFFÂ Phone Price : $20.55
- $19.56 |Â9% OFFÂ Phone Price : $21.56
- $21.16 |Â22% OFFÂ Phone Price : $27.16
- $74.45 |Â7% OFFÂ Phone Price : $80.45
- $64.52 |Â10% OFFÂ Was : $71.69
- $14.98 |Â12% OFFÂ Phone Price : $16.98
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #41AD29SA791 MTD gas line trimmer | 41AD29SA791 | Engine assembly |
Model #41ADAXSC793 MTD gas line trimmer | 41ADAXSC793 | Engine assembly |
Model #CMXGTAMD29SS Craftsman gas line trimmer | CMXGTAMD29SS | Engine assembly |
Model #CMXGTAMDAXSC Craftsman gas line trimmer | CMXGTAMDAXSC | Engine assembly |
Model #316794490 Craftsman gas line trimmer | 316794490 | Short block/fuel tank |
Model #316299372 Craftsman farming | 316299372 | Short block/fuel tank |
Model #41ADZ43C799 MTD gas line trimmer | 41ADZ43C799 | Short block/fuel tank |
Model #21CK144G799 MTD farming | 21CK144G799 | Short block/fuel tank |
Model #41ADSS30793 MTD gas line trimmer | 41ADSS30793 | Engine assembly |
Model #CMXGTAMDSS30 Craftsman gas line trimmer | CMXGTAMDSS30 | Engine assembly |
Reviews
The clutch on these weed eaters is junk.
I have 3 of these weed eaters and the clutch was out on 2 of them. One had the clutch come loose and messed up some other stuff. The new clutch did not fix it. So I guess it is just completely junk. The other one worked good for approximately 2 hours of work over about a week or so before the clutch went out again. I'm going to order a couple more clutches and run it until they go out. At that point I will cut my losses and get something that will last. I use these at my home and my daughters home only.
Justme, Seiling Oklahoma
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Weed eater
This fixed my weed eater you are great , it's workS great again Thank you
RLusko, Abilene Texas
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Where are the instructions?
The part was not difficult to install. It would have saved time to have minor written assistance or pictures such as to where to disassemble the drive shaft handle to mate the drive shaft with the clutch; how to access the clutch; what size allen wrench was required to remove the clutch bell from the engine shaft and how to freeze the engine from rotating when removing the old components.
canocker, GB isconsin
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
The replacement parts were of good quality.
They fit perfectly and got me back to yard work within about 15 minutes. Quick shipping time, too.
Video M, Indianapolis, IN
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
works great
the clutch was fairly easy to install after I dissembled the correct area.
Huie, Rock Springs, Wyoming
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Right part at a good price.
Weed eater clutch, easy to install. You do not have to be a mechanic.
Ron s, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
It took a lot of disassembly.
Wasn't overly hard to replace although the drive cable didn't properly engage and had to disassemble farther a 2nd time. Weedeacker worked great.
J D R, Speedwell, Tennessee
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
it was on tight but came off ok
Took out spark plug & put rope into cy. to keep from turning to get clutch off with channel locks. Worked great. Simple and quick.
maxy, Glenwood,Iowa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour