$6.31 |Â
14% OFFÂ Phone Price : $7.31
CONFIRM THE PART FITS
Hub Nut WH02X1193
Part #WH02X1193
Replaced by #WH2X1193
?
Manufacturer substitution
This part replaces WH02X1193. Substitute parts can look different from the original.
Online Only Price
$8.64 |Â
10% OFFÂ Phone Price : $9.64
In Stock
For ZIP codes near Edit
Part Information
This hub nut (part number WH2X1193) is for washers.
Hub nut WH2X1193 holds the washer hub to the gear case shaft.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $10.51 |Â16% OFFÂ Phone Price : $12.51
- $29.01 |Â17% OFFÂ Phone Price : $35.01
- $6.31 |Â14% OFFÂ Phone Price : $7.31
- $213.37 |Â5% OFFÂ Phone Price : $225.37
- $22.18 |Â21% OFFÂ Phone Price : $28.18
- $191.95 |Â6% OFFÂ Phone Price : $203.95
- $24.86 |Â19% OFFÂ Phone Price : $30.86
- $100.87 |Â11% OFFÂ Phone Price : $112.87
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #WMCD2050H2WC GE washer | WMCD2050H2WC | Tub, basket & agitator |
| Model #WCCD2050H2WC GE washer | WCCD2050H2WC | Tub, basket & agitator |
| Model #WCRD2050H2WC GE washer | WCRD2050H2WC | Tub, basket & agitator |
| Model #WCCB1030H2WC GE washer | WCCB1030H2WC | Tub, basket & agitator |
| Model #WCCD2050H0WC GE washer | WCCD2050H0WC | Tub, basket & agitator |
| Model #WMCD2050H0WC GE washer | WMCD2050H0WC | Tub, basket & agitator |
| Model #WCRD2050H0WC GE washer | WCRD2050H0WC | Tub, basket & agitator |
| Model #WCCB1030H0WC GE washer | WCCB1030H0WC | Tub, basket & agitator |
| Model #WDSR110T5WW GE washer | WDSR110T5WW | Tub, basket & agitator |
| Model #WNSR2100T2WW GE washer | WNSR2100T2WW | All parts |
Reviews
Reairing my washer.
Removing the old nut is a really tough job. If you can find a 1-11/16" spanner wrench it should make it easier to remove the old nut.
henry d, San Antonio, TX
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Not the right part
The replacement nut is the correct nut on the drawing and labeled as such when it arrived. The new nut WH2X1193 has a finer thread than the shaft, about 24 threads per inch vice 20 tpi. They are sending another. If it is also wrong I will have to take it apart and return the shaft, nut. bearing, and coupling and scrap the washing machine. The left hand replacement was also labeled loosen with no arrow to indicate direction. The original GE number as indicated by Sears was WH02X1193. Another supplier has a 360 degree image (same nut same number) that looks like the correct threads.
Dan t M, Washington
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours