$13.24 |Â
13% OFFÂ Phone Price : $15.24
CONFIRM THE PART FITS
Part Information
Skid shoe 784-5580-0637 is an original equipment manufacturer (OEM) part that fits snowblowers in these series: Craftsman 247; MTD 3AA, 3BA, 31A, 31B and 769; Troybilt 13A, 31A, 5524 and N779; and Yard-Man 31A.
Skid shoe 784-5580-0637 attaches next to the auger housing and slides along the ground so the snowblower can move smoothly. It also elevates the auger housing so it clears the ground, protecting it from damage. Replace both skid shoes at the same time to prevent uneven wear.
Replaces original snowblower skid shoe part numbers 784-5580 and 784-5580-0498.
Fits these Craftsman snowblower models 24710568, 24742513, 247882550, 247882551, 247882690, 24788347, 247883550, 247883700, 247884330, 247884331, 247884551, 247885500, 247885550, 247885680, 247885690, 247886640, 247887000, 247887001, 24788771, 247887900, 247888160, 247888500, 247888510, 247888520, 247888530, 247888540, 247888550 and 247888900.
Frequently Used Together
- $12.75 |Â14% OFFÂ Phone Price : $14.75
- $37.74 |Â14% OFFÂ Phone Price : $43.74
- $15.70 |Â11% OFFÂ Phone Price : $17.70
- $6.46 |Â13% OFFÂ Phone Price : $7.46
- $5.42 |Â16% OFFÂ Phone Price : $6.42
- $76.89 |Â7% OFFÂ Phone Price : $82.89
- $37.74 |Â14% OFFÂ Phone Price : $43.74
- $11.86
- $5.37 |Â16% OFFÂ Phone Price : $6.37
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #E662E MTD gas snowblower | E662E | |
| Model #316E640F000 MTD gas snowblower | 316E640F000 | |
| Model #31AE6B3H401 MTD gas snowblower | 31AE6B3H401 | |
| Model #3525401 MTD gas snowblower | 3525401 | |
| Model #31AE623D401 MTD gas snowblower | 31AE623D401 | |
| Model #E6B3H MTD gas snowblower | E6B3H | |
| Model #31AE633E401 MTD gas snowblower | 31AE633E401 | |
| Model #315E640F000 MTD gas snowblower | 315E640F000 | |
| Model #315E633E401 MTD gas snowblower | 315E633E401 | |
| Model #E633E MTD gas snowblower | E633E |
Reviews
Returned item
I know how to install. Received only 1 for the price of 30.00 dollars. Sent it back cause I can buy 2 for the price of at Sears Direct. Overpriced. Would not recommend them
Noooooo, Ohio
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Skid Shoes'too thin too expensive!
These Skid Shoes are very annoyingly under designed! They are only mild steel and not nearly thick enough. The wear out every year and cost $50 to replace the pair. At the very least they ought to be hardened steel.
Wizard, Colorado Springs, CO
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Reliable Sears Craftsman Snow Thrower
Purchased Sears Craftsman 9 HP, 26" Track-Drive Snow Thrower in 1996. Gets heavy winter use in my Colorado location. Still runs well, still purchasing slide shoes from Sears Parts Direct in 2021.
none, Colorado
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Overpriced soft iron shoe
Typical soft iron shoe without any thought to weld a hardened iron bead or two across bottom so it would last longer. Overpriced and shipping for what you get.
Fishin' f, Littleton CO
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Install skid shoe on snowtrower
Simple install two nuts off remove old worn part install new shoe attach and tighten two nuts. Done.
oldman22, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Great service from Sears.
The item was delivered in a very, very timely manner. I'm very satisfied with Sears!
Micheal D B, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Snowblower Skid Shoes
New parts fit well and were easy to bolt on. Old bolts needed to be cut away with an angle grinder.
John U N, Ludington, MI
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
snow skid shoe
It was very easy once I got the rusted and corroded carriage bolts loose and off the blower. Bolts were so rusted that I had to go to the hardware store to get new bolts to replace the existing bolts. I bought stainless steel carriage bolts so that they will not rust and get corroded, the next time skid shoes need replacement
Twitt, Northbrook, IL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes