$32.00 |Â
16% OFFÂ Phone Price : $38.00
CONFIRM THE PART FITS
Snowblower Auger 684-04108A
Part #684-04108A
Replaced by #684-04108A-0637
?
Manufacturer substitution
This part replaces 684-04108A. Substitute parts can look different from the original.
Online Only Price
$90.18 |Â
6% OFFÂ Phone Price : $96.18
In Stock
For ZIP codes near Edit
Part Information
This auger (part number 684-04108A-0637) is for snowblowers.
Auger 684-04108A-0637 consists of rotating blades that collect snow and throw it from the auger housing and through the chute.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $101.45 |Â11% OFFÂ Phone Price : $113.45
- $3.00 |Â25% OFFÂ Phone Price : $4.00
- $3.14 |Â24% OFFÂ Phone Price : $4.14
- $19.56 |Â9% OFFÂ Phone Price : $21.56
- $21.16 |Â22% OFFÂ Phone Price : $27.16
- $74.45 |Â7% OFFÂ Phone Price : $80.45
- $64.52 |Â10% OFFÂ Was : $71.69
- $14.98 |Â12% OFFÂ Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247985380 Craftsman gas snowblower | 247985380 | Auger & housing |
| Model #24788173 Craftsman gas snowblower | 24788173 | Auger & housing |
| Model #31A-62BD799 MTD gas snowblower | 31A-62BD799 | Auger housing |
| Model #31AS53SF793 MTD gas snowblower | 31AS53SF793 | Auger & housing |
| Model #247985370 Craftsman gas snowblower | 247985370 | Auger & housing |
| Model #31AH54SG793 MTD gas snowblower | 31AH54SG793 | Auger & housing |
| Model #247887910 Craftsman gas snowblower | 247887910 | Auger/housing |
| Model #31AM6CSG793 MTD gas snowblower | 31AM6CSG793 | Auger housing parts |
| Model #CMXGBAM1054543 Craftsman gas snowblower | CMXGBAM1054543 | Auger housing parts |
| Model #247881720 Craftsman gas snowblower | 247881720 | Auger & housing |
Reviews
I had some experience, so it was fairly easy.
I spent nearly 2 hours at it, but I spent the time to clean and lube some things while I had it apart. You need to separate the auger from the rest of the machine. Then you take the pulley off the back. You don't need a puller just a wrench. Then you take the 4 bolts that hold the bearings on sides out. then it pulls right out. Remove shear pin(s) slide auger blade(s) off the end of the shaft. Now put it all back together.
Bill L, Northwest Pennsylvania.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend