Lawn Tractor Steering Sector Gear (replaces 136874) 532136874

This may happen again.

Exactly like the original. Which would not have worn out if other parts in the steering assembly weren't made of flimsy plastic. But I'm still happy with your parts and service. All parts in this assembly should be made of metal with zerks for greasing.

Ease of Installation

Easy

Duration of Installation

More than 2 hours

Yes, I would recommend this to a friend

Lawn Tractor steering gear

Not too difficult for a shade-tree mechanic. Hint: Pay close attention to how things come apart.

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Quality part

Tractor went Nascar and would only turn left. Old Craftsman. Model #917270812 Craftsman 42" 19.5-hp electric start mower with 6-speed transaxle Figured out the teeth on the sector gear had been ground down and wouldn't catch. Part is a perfect fit. Somewhat difficult to install - do some research and find a video. Basically have to remove entire apparatus to fix this part (steering wheel all the way down to block that holds sector gear in place. I ordered a steering shaft also since I wasn't sure if those teeth were also worn down. Once I got it apart, the old steering shaft piece was in good shape but the sector gear was well worn. 1. Remove bed. 2. Remove battery and battery shelf to get to part. 3. Remove steering wheel and get down to just shaft. Attach vise grip to shaft. If you are also replacing the steering shaft you should do this piece before you put everything back together below - otherwise you might have to take it apart if you miss something. 4. Disconnect drag link from lever under sector gear. 5. Disconnect / Remove housing that holds gear and shaft together - 4 bolts underneath. 6. Remove bolt holding housing together. 7. Use hammer to separate sector gear. 8. Install new sector gear / steering shaft. Tough fit. I put the sector gear straight up with the lever pointing straight down which seemed to be the correct alignment. 9. Hammer / slide all pieces back into place. 10. Reinstall side bolt holding everything back together. 11. Reinstall 2 bolts underneath to secure housing. 12. Secure steering shaft with plastic piece that aligns shaft. 13. Check alignment of everything. If you can turn the gear all the way to the stops without coming off of the teeth, you are good to go. If not, go back to step 8. Note where you initially put the gear in relation to the lever that connects to the drag link. Move slightly in direction you need more room. 14. Tighten everything and replace battery / steering wheel.

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Good service, prompt shipment

Part was correct the first time, easy to install after figuring out what all had to come apart to get it in.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

High quality direct replacement

High quality part direct replacement delivered on time.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Hard time installing

I have a hard time getting under my mower and it is hard to remove and replace the parts.

Ease of Installation

Difficult

Duration of Installation

More than 2 hours

Steering Sector - The Right Part

It was relatively easy to find this atypical replacement part online and the price was reasonable. It was somewhat complex to install, but someone who is fairly handy and patient can do so do so without any training. I probably saved $200-$300 in costs at a repair shop.

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

parts came quick

easy to install. a little ackward . could have used a third hand

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours