$58.21 |Â
9% OFFÂ Phone Price : $64.21
CONFIRM THE PART FITS
Range Oven Control Board and Clock (replaces 316207509, 316557529) 316207529
Part #316207529
Online Only Price
$253.29 |Â
5% OFFÂ Phone Price : $265.29
In Stock
For ZIP codes near Edit
This part fits
Part Information
Helpful DIY instructions: Installation guide with video.
This oven control board and clock (part number 316207529) is for ranges.
Oven control board and clock 316207529 monitors the oven temperature and controls the oven heating functions in the range, and includes the digital display for the time and temperature settings.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $25.89 |Â19% OFFÂ Phone Price : $31.89
- $29.95 |Â17% OFFÂ Phone Price : $35.95
- $128.59 |Â9% OFFÂ Phone Price : $140.59
- $36.79 |Â14% OFFÂ Phone Price : $42.79
- $142.23 |Â8% OFFÂ Phone Price : $154.23
- $23.22 |Â21% OFFÂ Phone Price : $29.22
- $5.38 |Â16% OFFÂ Phone Price : $6.38
- $4.69 |Â18% OFFÂ Phone Price : $5.69
- $7.52 |Â12% OFFÂ Phone Price : $8.52
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #GLEF378CSC Frigidaire electric range | GLEF378CSC | Backguard |
| Model #FEF376ASK Frigidaire electric range | FEF376ASK | Backguard |
| Model #FEFL78CBA Frigidaire electric range | FEFL78CBA | Backguard |
| Model #GSE3WZCBB Frigidaire electric range | GSE3WZCBB | Backguard |
| Model #GLEF378CSE Frigidaire electric range | GLEF378CSE | Backguard |
| Model #GLEF378CBB Frigidaire electric range | GLEF378CBB | Backguard |
| Model #GSE3WZCQE Frigidaire electric range | GSE3WZCQE | Backguard |
| Model #GLEF378CSB Frigidaire electric range | GLEF378CSB | Backguard |
| Model #GLEF378CQC Frigidaire electric range | GLEF378CQC | Backguard |
| Model #FEFL78CQD Frigidaire electric range | FEFL78CQD | Backguard |
Reviews
Perfect Fit
The replacement Control Board & Clock part purchased was an exact match to the one I took off. I didn't have any issue but had to be careful removing the old touchpad with a putty knife to re-use on the new one. Some of the electric plugs were hard to remove but needle nose pliers got them off okay. Once I had it back together, it kicked on just fine and all was working as it did before.
Stewart S, Uniontown, OH
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install.
The oven made a "pop" noise and threw the breaker. No power after reset. Looked at new ovens then found this part.
Madness80, Harrisburg PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
The right part, but no bezel
A direct replacement for the original board, but does not have a face panel. You'll need to carefully remove the panel face from the original module and attach it to the new one.
sfoegley, Warsaw, IN
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to Install
Once you've unplugged the range and removed the top back panel, there are only four screws holding the Control Board in place. Put the new new faceplate on the new Control Board before starting to swap the boards over. If you disconnect the flat cable connector first you can replace the oven, broil, and power wires one at a time to the new board reducing chances of error. You will need a flat blade screwdriver to pry out the locks on the ribbon cable connector. They don't tell you but you also need to order the new face plate that goes with it.They are stuck to the Control Board and easy to tear up trying to get it off of the old one. The entire job took only 20 to 30 minutes after you get the oven out so you can get behind it. I would recommend sears parts offers the faceplate whenever anyone is ordering a new Control Board.
fixster, Glide, OR
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour