CONFIRM THE PART FITS

Refrigerator Dispenser Auger WP2198574

Part #WP2198574

Online Only Price
$91.71
6% OFF Phone Price : $97.71
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This dispenser auger (part number WP2198574) is for refrigerators.

Dispenser auger WP2198574 rotates to push the ice from the ice container into the dispenser chute.

Wear work gloves to protect your hands when installing this part.

Top models using the same part

Model NameModel NumberDiagram Name
Model #10657066601 Kenmore side-by-side refrigerator10657066601
Motor and ice container parts
Model #10657064601 Kenmore side-by-side refrigerator10657064601
Motor and ice container parts
Model #10653764201 Kenmore side-by-side refrigerator10653764201
Motor and ice container
Model #10657036600 Kenmore side-by-side refrigerator10657036600
Motor and ice container parts
Model #10656676501 Kenmore side-by-side refrigerator10656676501
Motor and ice container parts
Model #10653652300 Kenmore side-by-side refrigerator10653652300
Motor and ice container parts
Model #10653554200 Kenmore side-by-side refrigerator10653554200
Motor and ice container
Model #10656536401 Kenmore side-by-side refrigerator10656536401
Motor and ice container parts
Model #10653754202 Kenmore side-by-side refrigerator10653754202
Motor and ice container
Model #10653654300 Kenmore side-by-side refrigerator10653654300
Motor and ice container parts

Reviews

Awesome customer service
June 15, 2023

Did an awesome job with customer service. Called them and notified them that I didn't receive one item on my order and they sent it out immediately.

Doc, Phoenix

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Not the same as original
June 08, 2021

This part is different. The original had a near right angle bend close to the bottom which stirs the ice at the bottom of the bucket. The replacement has about a 45 degree bend, which leaves the ice at the bottom unstirred, so the ice tends to freeze into a block.

bac42, Chester, New York

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Not the same auger design
May 23, 2018

The design of the auger is diiferent. The auger is higher than the original and does not make the ice dispense. It is much smaller than the original. It is an easy install, but does not work.

Rens, Manassas, va

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Quick and easy install
March 28, 2018

Took more to empty the ice container than to change the parts. The ice dispenser coupler had broken in half. When I checked the dispenser I noticed the auger did not remain straight. it wobbled as it turned. I ordered both items. Once I received the items, I set aside 2 hours to get it done. Once I unscrewed the retaining screw and the plate, I was able to remove the auger. I removed the blades and placed them on the table in line. I installed the blades on the new auger and reinstalled them in the dispenser. Once I made sure everything was correct, reinstalled the washer and the new coupled, replaced the screws on the plate and the auger. I reinstalled the dispenser, turned on the icemaker. Half an hour. that's it.

Mike994, Stone Mountain, GA

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes