CONFIRM THE PART FITS
Part Information
This power head coupling assembly (part number NUE-003A) is for vacuums.
Power head coupling assembly NUE-003A connects the power head to the lower wand.
Unplug the vacuum before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #EL6988E Electrolux canister vacuum | EL6988E | Powerhead |
| Model #EL4300A Electrolux canister vacuum | EL4300A | Power head |
| Model #EL7020BZ Electrolux canister vacuum | EL7020BZ | Power head |
| Model #EL7020B Electrolux canister vacuum | EL7020B | Power head |
Reviews
Exactly the part I needed
You will likely need to solder the electrical connection. Not a difficult step but definitely review or practice your soldering before making the final connection.
Jesse_EG, Seattle, WA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Fair Instal
Did my own install after Sears serviced previously had to replace missing parts and screws was not properly wired.If this is the shoddy work Sears is doing no wonder the company is in trouble.
Geralt, Olympia WA.
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Take your time.
It wasn't as easy to install as I hoped it would be. Remove six screws from the bottom of the unit. Flip over and carefully pry the top off. Now, take a digital photo before you take anything else apart. Remove enough to allow the neck to be removed and the new one installed. I needed a soldering iron to hook the power leads back up to the circuit board. My model did not have the push pins. Refer to your photo for reinstallation of the various sub assemblies you removed.
RonC, Williamsport, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours