Range Oven Control Board (replaces 316557114) 5304511908

Frigidaire Oven/Range Timer

I ordered the range timer, but then figured out that the timer wasn't the problem with the range. So I canceled the order. But Sears shipped it anyway a day after I canceled the order. I finally (after three calls) got a return RMA (and they did pay the return shipping) but every person I talked to tried to sell me on water filter subscriptions. I still haven't gotten my refund.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install, took care of my problem. Always .

Removed control panel cover, detached wiring harness removed four screws and easily installed the control board.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install. Great price.

Took about 5 minutes to install! Very easy to install.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Simple and Fast

Replacing the Control Board was easy to do because I had watched Sears' video and followed its guidance. Photo'd the old board for wire attachment reference, then removed the old board. Used a hair dryer carefully to loosen the old decal with a putty knife, and applied it to the new board's face. Held the board by its plastic frame to avoid damaging any circuit components and attached the wire leads to proper terminals - same as old board locations. Mounted the new board in place and temporarily plugged in my range to test control pad functions. Had to move the decal up about 1/32 inch for decal alignment to match the push buttons on board. All buttons, indicator lights and clock numbers are properly functioning. All told, took under 20 minutes from start to finish and looks great! Still have not used the oven but expect it to no longer set F10 fault messages.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to order and install.

Easy to install. I recommend taking a picture of wire orientation prior to removing previous electronic oven control board. Also, keep the previous part for the overlay. Heat it with a hairdryer before removing overlay and there should be enough adhesive left on it to reuse on the new part. New board won't be OEM. Connection designations are similar, but not exact. New part was a substitution. Worked exactly as expected. I'll buy from Sears partsdirect again. Customer service is phenominal.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes