$148.58 |Â
7% OFFÂ Phone Price : $160.58
CONFIRM THE PART FITS
Part Information
This humidity sensor (part number DE32-60011A) is for microwaves.
Humidity sensor DE32-60011A detects humidity inside the microwave and communicates the temperature to the electronic control board.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
Frequently Used Together
- $27.29 |Â18% OFFÂ Phone Price : $33.29
- $132.51 |Â8% OFFÂ Phone Price : $144.51
- $18.27 |Â10% OFFÂ Phone Price : $20.27
- $4.52
- $16.00 |Â11% OFFÂ Phone Price : $18.00
- $17.40 |Â10% OFFÂ Phone Price : $19.40
- $18.56 |Â10% OFFÂ Phone Price : $20.56
- $36.17 |Â14% OFFÂ Phone Price : $42.17
- $14.09 |Â12% OFFÂ Phone Price : $16.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #ME18H704SFW/AA-01 Samsung microwave/hood combo | ME18H704SFW/AA-01 | Main assy |
| Model #NQ70M6650DS/AA-00 Samsung wall oven/microwave combo | NQ70M6650DS/AA-00 | Main asy |
| Model #NQ70M6650DG/AA-00 Samsung wall oven/microwave combo | NQ70M6650DG/AA-00 | Main asy |
| Model #ME18H704SFW/AA-00 Samsung microwave/hood combo | ME18H704SFW/AA-00 | Cabinet parts |
| Model #ME18H704SFB/AA-00 Samsung microwave/hood combo | ME18H704SFB/AA-00 | Cabinet parts |
| Model #ME18H704SFB/AA-01 Samsung microwave/hood combo | ME18H704SFB/AA-01 | Main assy |
| Model #SMH1713W/XAA-01 Samsung microwave/hood combo | SMH1713W/XAA-01 | Cabinet parts |
| Model #ME18H704SFS/AA-00 Samsung microwave/hood combo | ME18H704SFS/AA-00 | Cabinet parts |
| Model #ME18H704SFS/AA-01 Samsung microwave/hood combo | ME18H704SFS/AA-01 | Main assy |
| Model #SMH1927W/XAA-01 Samsung microwave/hood combo | SMH1927W/XAA-01 | Main assy |
Reviews
Direct fit for replacement
Easy to find once the microwave was removed from the top of the stove
Rup66, Jonesville va
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
GE Microwave Steam Sensor
The part itself is plug and play. Getting to it in another story. But with patience and help from YouTube University, start to finish was roughly an hour. Mine is an under the cabinet model, so taking it down was the most consuming.
Iaknowy, Downingtown, PA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
The sensor was easy; the rest was NOT!
It took way too long to get the microwave out and once I got the case off the R&R of the sensor took five minutes tops. I broke the white clip like someone else did; I still don't know how to get the clip on or off. Hopefully the sensor won't vibrate loose, but if it does, I refuse to remove the microwave to do it. Take the black plastic piece off that holds the filter (above the door) and its right there in a metal box. I think it will be a whole lot easier to get the box open than take the microwave down again. The worst part was rebuilding the exhaust vent conduit, so if idiots didn't do the original installation you may not have it problem at all. Now that the Samsung microwave works as designed, it may win my wife over, but so far she's ready to replace it if we have to replace the sensor again. (We got the microwave when we bought the house and the sensor never worked. Since the microwave is so high off the ground, it's dangerous for her to pull out anything that's full and can't be tilted, so she's looking for reasons to junk the over the stove unit and put one on the small countertop.)
jeff321, Oviedo, FL
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
You had what I needed
Everting worked as expected. A humidity sensor and thermostat.
Sjt b, Missouri
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour