$114.79 |Â
9% OFFÂ Phone Price : $126.79
CONFIRM THE PART FITS
Freezer Door Gasket 5304507214
Part #5304507214
Replaced by #5304507200
?
Manufacturer substitution
This part replaces 5304507214. Substitute parts can look different from the original.
Online Only Price
$116.27 |Â
9% OFFÂ Phone Price : $128.27
In Stock
For ZIP codes near Edit
This part fits
Part Information
Special details: Smooth folds and creases in gasket 5304507200 by soaking it in warm water or warming it with a hair dryer on low heat.
This door gasket (part number 5304507200) is for freezers.
Door gasket 5304507200 creates a seal around the door to prevent warm air from entering the freezer.
Safely store any food that could deteriorate while the power is off and unplug the freezer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $417.18 |Â$12.00 OFFÂ Phone Price : $429.18
- $60.21 |Â9% OFFÂ Phone Price : $66.21
- $362.44 |Â$12.00 OFFÂ Phone Price : $374.44
- $8.49 |Â11% OFFÂ Phone Price : $9.49
- $12.59 |Â14% OFFÂ Phone Price : $14.59
- $58.99 |Â9% OFFÂ Phone Price : $64.99
- $12.71 |Â14% OFFÂ Phone Price : $14.71
- $38.69 |Â13% OFFÂ Phone Price : $44.69
- $11.09 |Â15% OFFÂ Phone Price : $13.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #25344772702 Kenmore Elite upright freezer | 25344772702 | Door |
| Model #GLFU1767FW3 Frigidaire upright freezer | GLFU1767FW3 | Door |
| Model #25326752100 Kenmore Elite upright freezer | 25326752100 | Door |
| Model #25344772701 Kenmore Elite upright freezer | 25344772701 | Door |
| Model #E32AR75FPS3 Electrolux refrigerator | E32AR75FPS3 | Door |
| Model #FFH1767GWZ Frigidaire upright freezer | FFH1767GWZ | Door |
| Model #GLFH1767GW1 Frigidaire upright freezer | GLFH1767GW1 | Door |
| Model #E32AF75FPS2 Electrolux upright freezer | E32AF75FPS2 | Door |
| Model #E32AF75FPS3 Electrolux upright freezer | E32AF75FPS3 | Door |
| Model #E32AF75FPS5 Electrolux upright freezer | E32AF75FPS5 | Door |
Reviews
I would purchase this again.
I needed this door gasket for my freezer. I ordered and within a few days my order was delivered. Very timely and responsive. The old gasket was removed and this new one went right on. I would order again.
Tom, Bradford, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Gasket manufactured incorrectly
The part you shipped me was manufactured incorrectly. One corner was twisted when it was heat welded and it is impossible to install. I noticed on the shipping box that this gasket was previously returned by someone in Biloxi, MS. You should not ship it to someone else but you should return it to the manufacturer in Mexico.
Home H, Augusta, GA
3 people thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Outdoor beverage fridge gasket. A must have in AZ
Got this for our 6 year old outdoor beverage fridge that sits in the AZ heat, covered outside. The old gasket was dry rotting even with yearly conditioning so the fridge contents were accumulating condensation. Worked like a charm after a little maneuvering and a little gasket sealer. Took about 30 minutes to install. Lots of screws! Tight as a drum now! Thanks!
Tami Q, AZ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Door gasket installation
Review uTube video before installing https://youtu.be/e8pa7lBVlm8
Chris, Texas
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
The gasket had a kink in it from manufacturing.
Poor quality control, item had a kink in it. wouldn't lay flat to install.
ANdreaHB, Yuma, AZ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Great fit not difficult
It works great and is not difficult to change out bc it the old one. Easier if take the door off. Don't remove all the screws just loosen them. Took about an hour total.
RevCKay, Suwanee , GA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Good fit
Would fit better if it was cold when installing. While warm it was a loose fit on the door.
Rotor, AL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
More complicated than I anticipated.
Installing the door gasket was more complicated than I had anticipated. I thought it would be simply removing the old gasket and installing the new gasket, as I had done for refrigerator last summer. What I discovered was that this gasket is more secured to the door by screws around the door. So, I had to loosen the screws to try to work the lip of the gasket into the space. The top worked as expected. The sides were harder. When I got to the bottom, there was water dripping - apparently there was ice/frost built up inside the door, so I decided to wait to let the door thaw out and as much of the water as possible drain before continuing the installation. So, I removed everything from the freezer (these items did not have to be kept fully frozen), so I could wipe out the body of the freezer. After waiting for about an hour and a half or so, I was able to finish installing the gasket and confirming that it was all the way in around all edges and the bottom before turning the freezer back on. Overall, it took 4-5 hours to finish the job. Even though the job was more complicated than expected, I understand why this gasket is secured the way it is, since it's important for the gasket on a freezer to be reliably secured.
Fishin i H, Honolulu
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend