CONFIRM THE PART FITS
Kenmore Vacuum Hose Swivel KC70SDWCZV06
Part #KC70SDWCZV06
Part Information
This hose swivel (part number KC70SDWCZV06) is for vacuums.
Hose swivel KC70SDWCZV06 connects the power head hose to the vacuum.
Unplug the vacuum before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #11621814411 Kenmore Elite canister vacuum | 11621814411 | Floor brush |
Model #11621814410 Kenmore Elite canister vacuum | 11621814410 | Floor brush |
Model #12521814610 Kenmore canister vacuum | 12521814610 | Floor brush |
Model #12521814610 Kenmore Elite canister vacuum | 12521814610 | Floor brush |
Reviews
Easy to install
The part arrived earlier than expected. It was very easy to install.
Happy c, Indiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Almost a perfect fit
This vacuum hose swivel had different wiring than the original but the plastic parts were identical. Instead of trying to figure out how to rewire this I just swapped the wiring harness and tiny circuit board from the old to the new one. A hint on how to remove the old swivel neck is to use two butter knives to act as shims to allow the swivel retaining housing to slide off the plastic retaining clips. There is a spring that is part of the swivel assembly so you will need to preload that while when installing the part, Also take photos of the inner assembly after you get top housing cover off it will be easier to route the wires in the proper locations on reassembly. The height adjustment mechanism is held in to the assembly with molded in clips, you will need to push the height assembly toward the center to disengage it from outer clips and then you should be able pry it up to remove. After reassembled it worked great. Don't forget to clean the wooden brush roller removing all the stuff that gets wrapped around there. While everything is apart it's a great time to replace light bulbs and the belt. No YouTube videos on this part installation unfortunately at the time of writing this review unfortunately.
Mr. E, Watertown Connecticut
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Strange shipping date
Medium difficulty in installation, I had to disassemble the entire piece it connects into and connect 3 wires. I've done a number of these types of repairs on household and medical devices. You can do it!
lhommebd, St. Louis, MO
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
This worked, something else broke. Never Kenmore
It was easy to install. Too bad the next week there was another broken part that could not be replaced. Can you say "Planned Obsolescence?" the other part was no longer available so I either had to replace the whole hose assembly ($250.00) or buy a new vacuum. Buying a new vacuum and it's not going to be Kenmore.
Never K, New Jersey
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Adding to life of vacuum cleaner
The process of repairing the nozzle of the vacuum cleaner was very easy. The rep during the purchase provided me degree of difficulty and was spot on that it was a simple DYI activity
Jimmy D, West Berlin NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Successful Repair
Part arrived quickly and was easy to install. Identical match for broken part.
Giants f, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
achievement
pretty easy to install need a little mechanical experience but all and all most people could achieve it
Eastman, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Quick and easy
Perfect replacement part. Installed in 15 minutes.
Nedski, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend