CONFIRM THE PART FITS

Refrigerator Ice Maker 241798219

BEST SELLER

Part #241798219

Replaced by #5303918493
?
Manufacturer substitution
This part replaces 241798219. Substitute parts can look different from the original.
Online Only Price
$153.22 | 
7% OFF Phone Price : $165.22
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

Ice maker 5303918493 includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.

If your ice cubes seems small, it could be time for a new water filter. You can find your filter here.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Reviews

Exact fit
March 07, 2022

Exact fit replacement. About 25 minutes total to install. Works great!

Byron, SW Virginia

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install
March 28, 2021

The technician wanted to charge me $593 for the repair. I purchased the part and replaced it my self. However, it appears the ice maker wasn't the issue. I am still trying to determine the issue.

Golf69er, Maricopa, Az

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Ice maker motor went bad in 6 yr old fridge.
May 22, 2020

The motor went bad in the ice maker of my 6 year old Electrolux french door bottom freezer. At first I thought the water filter was plugged but after replacing the filter, the ice maker would not rotate at all by pulling on the rotating forks, figured it must be the motor. Side note, if you reach in and pull on the rotating forks for rotation to the right it should force it to manually cycle unless the motor is no good. This part replaced the whole ice maker assembly and was easy to install. Steps were to remove the door and drawers, remove the back shield, unplug the electrical component, remove one screw in the side in front of the assembly and it slides out (getting it to slide out was the toughest part). It re-uses the bracket it slides out with. Unscrew the bracket and put it on the new one and slide it back in, connect the electrical plug, and you will be back in business after you have the door back together and it gets back down to freezing again. Simple job took about an hour and half with emptying the freezer and cleaning everything well before putting it all back together. Afterwards it took two to three days for a full bucket of ice.

Michelle - V U, Vancouver, WA

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Exact replacement part fit perfectly in my fridge
January 28, 2020

Perfect fit . Came quickly and in one piece! Would purchase again.

GPmopar, Az

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Exact replacement
October 15, 2019

Simple replacement Old ice maker stopped working

Tjr3fan, Battle Creek mi

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
Not to hard
August 03, 2019

Once you get everything out of the way pretty simple install. Replaced unit in bottom freezer so removing the door made it so I didn't have to be a contortionist to get at everything that needed to be removed.

Skiwako, Idaho

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Very easy to install
July 31, 2019

Very easy to install! The new ice maker is working great.

Jacesgranny, League City TX

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Replacing the Icemaker
August 30, 2018

Just a few screws and the wiring harness - nothing to scare away even a novice, and a great sense of accomplishment each time we hear new ice dropping into the ice bin... Ample YouTube to bolster confidence

AndrewETI, Boca Raton

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour