Range Spark Module (replaces W10331686) WPW10331686

The right part for the job.

This module drives the spark for the burners and the oven. Sears had the right part for the best price I could find. Four screws to remove the access panel, and then just one screw to remove the board. I swapped the wires one at a time to avoid any mix ups (unplug stove first!). Added more years of life to my 18 year old stove.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Stovetop would not ignite

Once the stove was pulled out from between my counters, I removed a panel (4 screws), removed the module (1screw) and exchanged the lead terminals one by one until all the leads were in place on the new module. Of course make the stove is unplugged while performing the install. Sears had this module at a much lower price than other sources I checked.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Good Job

No worries took only minutes to install. Works great

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Easy installation

It took longer to put out the stove and take the back panel off than installing the part.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Oven didn't stay at temperature.

There are only a few parts that could go wrong. I tried a new thermostat, that didn't change anything. Which lead me to try this part. And YES that was it. Easy to replace too. just swap the wires and done. Sears had this priced much cheaper than anybody.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour