$4.37 |Â
19% OFFÂ Phone Price : $5.37
CONFIRM THE PART FITS
Part Information
Special details: If the timer doesn't advance during the wash cycle, unplug the washer and check for continuity through the timer motor using a multimeter. Replace timer WP3946471 if your meter measures infinite resistance.
This timer (part number WP3946471) is for washers.
Timer WP3946471 controls the electrical components and the duration of the washer's cycles.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $114.63 |Â9% OFFÂ Phone Price : $126.63
- $142.22 |Â8% OFFÂ Phone Price : $154.22
- $32.40 |Â16% OFFÂ Phone Price : $38.40
- $29.44 |Â17% OFFÂ Phone Price : $35.44
- $32.85 |Â15% OFFÂ Phone Price : $38.85
- $47.30 |Â11% OFFÂ Phone Price : $53.30
- $6.49 |Â13% OFFÂ Phone Price : $7.49
- $22.13 |Â21% OFFÂ Phone Price : $28.13
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #11091587210 Kenmore washer | 11091587210 | Control panel |
| Model #11091587410 Kenmore washer | 11091587410 | Control panel |
| Model #11092583810 Kenmore washer | 11092583810 | Control panel |
| Model #11092582410 Kenmore washer | 11092582410 | Control panel |
| Model #11092583200 Kenmore washer | 11092583200 | Control panel |
| Model #11092584800 Kenmore washer | 11092584800 | Control panel parts |
| Model #11092581100 Kenmore washer | 11092581100 | Control panel parts |
| Model #11092582800 Kenmore washer | 11092582800 | Control panel |
| Model #11092581210 Kenmore washer | 11092581210 | Control panel |
| Model #11091587200 Kenmore washer | 11091587200 | Control panel |
Reviews
Wrong Part
It said the part was a substitute but it did not fit
Valor, Silver Spring
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
ridiculously easy install
Turn the rubber handled selector counter clockwise to screw it off, lift out the clear plastic cover then pry the black needle selector piece of carefully with a narrow screw driver. Unscrew the 2 screws holding the timer to the face. Remove the 2 screws that hold the controls cover and lift it. Unplug the timer, and maybe the secondary connection for ease of handling. Plug in the new timer and secondary connection if unplugged. Put it all back together and do your wash. One tip, the new timer's screw holes are not threaded, so you have to force the new screws into the holes and have them tap the threading as you go, then back them out to have the holes ready for putting the timer in place. Do this before connecting the timer. It will make it easier putting the new screws in when you have the timer in place.
bob101, Denver, CO
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part works!
Just the part we needed to get our older Kenmore washer running properly.
Patricola, Hudson Valley, NY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy fix and install
Easy to install Exact fit and fixed my spin cycle not starting Use top load washer repair guides for easy instruction. https://www.searspartsdirect.com/diy/repair-guide/how-to-replace-the-timer-in-a-direct-drive-top-load-washer My end caps Kenmore 110.92584100 do not come off. Just remove front panel screws and lift.
Mesa, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Washer working again!
This was the correct replacement timer for my washing machine.I received it in a very dusty, dirty condition but it works none the less.Only problem was the mounting holes were not threaded but I thread tapped them myself.
Ronald G, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Simple replacement
Original design seemed to include ease of part replacement as a goal. So simple and quick, about 5 minutes
roadkil, Georgia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Simple installation
it was an exact fit to replace the 24 year old timer. simple to install. it's just a matter of having the right tools: a 1/4 inch nut driver with a long extension, and a Philips head #1 screwdriver.
klg_xn, Cranston, Rhode Island
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
DEFECTIVE PART - REQUIRE INSTRUCTIONS TO RETURN.
DEFECTIVE PART - OLD PART WORKED PARTIALLY; NEW PART DEFECTIVE. HAD TO HIRE SERVICEMAN WHO ACQUIRED TIMER THROUGH LOCAL PARTS DISTRIBUTOR.
Bora, St.Clair Shores, MI
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour