Official King-Craft generator parts

Frequently replaced parts in King Craft generators

• Carburetor. The engine carburetor is the component that mixes the air and fuel to create a combustible mixture that enters the engine cylinder and gets ignited by the spark plug to drive the piston.
• Air filter. The air filter prevents abrasive particles from entering the engine's cylinders, which could cause mechanical wear and oil contamination.
• Battery. On electric start engines, the battery provides the 12 volts needed to power the starter.
• Spark plug. The spark plug is the engine device responsible for delivering electric current from the ignition system to the combustion chamber of the cylinder. This current ignites the compressed fuel/air mixture by means of an electric spark, while containing combustion pressure within the engine.

Tuning up the engine on your King Craft generator

• Gather the supplies that you'll need such as oil, drain pan, air filter, spark plug, tools and personal protective equipment.
• Position the generator on a level surface in a well-ventilated area.
• Position the oil drain pan under the oil drain plug then remove the oil drain plug to drain the engine's oil. Reinstall the oil drain plug after the oil drains and wipe up any spilled oil. Dispose of the used oil properly. Refill the engine with fresh oil.
• Replace the air filter and spark plug.
• Start the engine and let it run for a few minutes then recheck oil level and add oil if needed.