Official Universal/Multiflex (Frigidaire) bottom-mount refrigerator parts
Universal Multiflex bottom-mount refrigerators offer the convenience of easy access to items stored in the refrigerator compartment and flexible food storage options. Innovative controls in Universal Multiflex bottom-mount refrigerators help keep your food at the right temperature to prevent spoilage. When your Universal Multiflex refrigerator isn't cooling as it should, find the parts you need to fix the problem at Sears PartsDirect.
Top-selling replacement parts for Universal Multiflex bottom-mount refrigerators
Ice maker assembly. The ice maker is a complete assembly that contains the ice mold and the control device. It plugs into a wire harness in the freezer or the ice compartment. The ice maker receives water from the inlet water valve and then holds the water in the ice mold until the water is frozen solid. It then automatically ejects the ice and refills to continue the process until the ice storage bucket is detected as full.
Light switch. The light switch turns the refrigerator light on and off and monitors door position. Replace the light switch if it doesn't work.
Compressor overload/PTC relay. The overload/PTC relay starts the compressor motor. It has 2 components: an overload protector that trips when the compressor motor overheats or locks up, and a relay. The relay completes the circuits to both the Start Windings and the Run Windings in the compressor motor. Once the motor is started, the relay de-energizes the Start Winding circuit so the compressor motor continues to run using just the run windings.
Thermistor. The thermistor is a temperature sensor within the refrigerator that sends information to the electronic control board.
Replacing the refrigerator thermistor in a Universal Multiflex bottom-mount refrigerator
Unplug the refrigerator or shut off the circuit breaker for the refrigerator.
Locate the thermistor in the refrigerator section; it’s under a small plastic cover attached to the surface of the back wall, side wall or ceiling. Release the thermistor cover and pull the thermistor out of the cover.
Pull the thermistor out of the mounting clip and unplug the wire harness. Remove the thermistor.
Attach the thermistor to the mounting clip and then to the wire harness.
Reattach the thermistor's cover and reinstall any shelves you removed.
Plug in the refrigerator or turn on the house circuit breaker to restore power.
Error Codes
