Official Maytag electric water heater parts

Replacing the drain valve in your Maytag electric water heater

• Switch the two house circuit breakers dedicated for the water heater to OFF. Wear work gloves to protect your hands.
• Turn off the cold water supply to the water heater. Attach a garden hose to the drain valve located at the bottom of the unit and run the garden hose outside. Open a hot water faucet in the house or flip the relief valve open on the water heater. Open the drain valve and allow the tank to drain until empty.
• Remove the garden hose from the drain valve. Unthread and remove the drain valve from the tank.
• Wrap some thread-sealing tape around the threads of the new drain valve. Install the new drain valve and tighten firmly.
• Turn the cold water supply on to the water heater and allow the tank to fill with water. Once you see water coming out of the hot water faucet, turn the hot water faucet off. Flip the house circuit breakers to the ON position.

How to replace the anode rod in your Maytag electric water heater

• Shut off the house circuit breakers for your water heater to completely disconnect electrical power.
• Turn off the cold water supply to the water heater. Attach a garden hose to the drain valve located at the bottom of the unit and run the garden hose outside. Open a hot water faucet in the house or flip the relief valve open on the water heater. Open the drain valve and allow the tank to drain about 5 gallons of water and then close the drain valve and remove the garden hose.
• Pry the plastic cap off from the top of the water heater covering the anode rod. Remove the foam insulation covering the anode rod. Unthread the anode rod and pull it up and out from the tank.
• Wrap pipe thread-sealing tape around the threads of the new anode rod. Thread the new anode rod into the tank and tighten firmly. Reinsert the plastic cap.
• Turn the cold water supply on to the water heater and allow the tank to fill with water. When water begins to flow from the open hot water faucet, turn the hot water faucet off.
• Restore the electrical power supply to the water heater.

When you’re looking for hot water repair near me, trust the pros at Sears Home Services to fix your water heater fast.