Funai VHS camcorders have a reputation for rugged dependability. Although Funai VHS camcorders rarely break down, those infrequent failures can occur at any time. When a camcorder failure happens, get the repair parts you need to fix your Funai VHS Camcorder at Sears PartsDirect.
Use a commercial camcorder lens cleaning solution and lens paper when cleaning the camcorder lens to avoid scratching the lens and distorting video capture. Don't touch the lens surface with your bare fingers or hand while cleaning.
Don't use strong or abrasive detergents when cleaning the camcorder body. Use only mild detergent and water to moisten a non-abrasive cloth and wipe down the camcorder body. Wipe off detergent residue using a lint-free cloth moistened with plain water. Dry the camcorder body thoroughly with a non-abrasive, lint-free cloth.
To protect the finish of the camcorder body, wash your hands and face to remove any chemical products such as make-up or suntan lotion that can damage the finish.
Protect the lens by keeping the lens cover installed on the camcorder then you're not using the device.
Battery care tips for your Funai VHS camcorder
Charge the camcorder battery only with the specified battery charger for your model of camcorder. Charging the battery with a different charger can cause battery damage.
Only charge the battery in an environment where ambient temperature is above 32-degrees F and below 104-degrees F. Charging the battery outside that temperature range can cause battery damage.
Don't get the battery near extreme heat sources such as fire or heaters.
Never attempt to disassemble the battery pack. Replace the battery pack if it gets damaged or it won't recharge.
