Samsung microwave hood combos use advanced controls to quickly heat and cook foods evenly. Sensor control features in Samsung microwaves take the guess work out of cooking and heating foods so dishes come out perfect. If your Samsung microwave hood combo stops heating, trust Sears PartsDirect to have the parts you need to fix the problem.
Common replacement parts for Samsung microwave hood combos
Grease filters. Grease filters are aluminum mesh air filters that trap grease residue from smoke that gets drawn through the microwave hood combo by the exhaust fan.
Light bulbs. Light bulbs illuminate the inside of the microwave hood combo cavity and the cooktop below the microwave hood combo.
Cooking tray. The cooking tray holds foods being cooked inside the microwave cavity and rotates to cook foods evenly.
Charcoal filter. The charcoal filter eliminates odors from exhaust air when the microwave hood combo exhaust system is set up to circulate exhaust air back into the kitchen space.
Replacing the turntable motor in your Samsung microwave hood combo
Unplug the microwave hood combo power cord to disconnect electrical power.
Open the microwave door and remove the turntable. Pull the turntable motor coupler off the turntable motor shaft. Close the door.
Remove the grease filters from the bottom panel of the microwave hood combo. Set the grease filters aside.
Remove the bottom panel mounting screws. Support the bottom panel as you remove the final mounting screw.
Allow the bottom panel to drop down slightly then disconnect the cooktop light wire harness. Remove the bottom panel.
Remove the turntable mounting screws and pull out the turntable motor. Install the new turntable motor and secure it with the mounting screws.
Reassemble the microwave hood combo and plug the power cord back into the wall outlet.
Owner’s manual
