Official Electrolux warming drawer parts

Cleaning tips for your Electrolux warming drawer

• Clean the warming drawer rack using a mild detergent and water. After cleaning, rinse the rack with clean water and dry it thoroughly with a clean cloth.
• Remove the control knob and clean it thoroughly with mild soap and water. You can also wash the knob in the dishwasher. Allow the inside of the knob to dry thoroughly before reinstalling it.
• Use warm sudsy water to clean the stainless steel front panel of the warming drawer. Wipe the surface in the direction of the stainless steel grain. Don't use a steel wool pad on the stainless steel because steel wool will scratch the stainless steel surface. Wipe the stainless steel surface with clean water and dry the surface thoroughly. Apply stainless steel cleaner to polish and protect the stainless steel surface.

Testing the high-limit thermostat in your Electrolux warming drawer

• The high-limit thermostat can prevent the warming drawer from heating if the thermostat trips and doesn't reset.
• You can check the high-limit thermostat using a multi-meter to see whether it's tripped and it's preventing the warming drawer from heating.
• Shut off the house circuit breaker for the warming drawer to completely disconnect electrical power before accessing and testing the high-limit thermostat.
• Disconnect the wires from the high-limit thermostat and measure the resistance through the high-limit thermostat using the multimeter. The meter should measure near 0 ohms of resistance through the high-limit thermostat if the thermostat is good. If the meter measures infinite resistance through the high-limit thermostat, you'll need to replace the high-limit thermostat.

When you need service, choose Sears Home Services for Electrolux appliance repair. We have the parts and expertise to repair the failure right.