Official Vitamaster fitness & exercise parts

Replacing a cable on your Vitamaster weight machine

• Wear work gloves to protect your hands when replacing the cable.
• Remove the key from the weight stack
• Create slack in the cable by adjusting the tension bolt.
• Remove the bolt that connects the cable to the lifting component.
• Release the cable from the weight stack.
• Release the pulley or pulleys that the cable goes through and remove the cable from the weight machine.
• Route the new cable through the pulley(s) and reassemble the weight machine. Tighten all fasteners securely. Remove slack from the new cable so it lifts the weight stack properly.

Top repair parts for Vitamaster elliptical exercise machines

• Resistance motor. The resistance motor changes the distance of the C-magnet from the flywheel to adjust the pedal resistance.
• Tension cable. The tension cable attaches to the C-magnet and adjusts the distance between the C-magnet and the flywheel to vary the resistance.
• Reed switch. The reed switch detects a magnet attached to the rotating crank arm pulley to sense speed and sends the speed signal to the console.
• Console. The console controls pedal resistance and displays time, distance, resistance level and other settings and readings.