Official Dirt Devil upright vacuum parts

Common replacement parts for Dirt Devil upright vacuum cleaners

• Brush roll. The brush roll rotates to loosen dirt and debris so it's drawn into the vacuum.
• Brush motor overload. The brush motor overload shuts off the brush roller motor if the motor overheats.
• Brush roll drive belt. The brush roll drive belt connects the brush motor to the brush roller to rotate the brush roller during vacuuming.
• Vacuum motor. The vacuum motor spins the vacuum fan blades to create the suction to remove dust and dirt from the carpet.

How to replace the beater bar in your Dirt Devil upright vacuum cleaner

• Unplug the power cord to disconnect electrical power from the vacuum cleaner.
• Turn the vacuum cleaner over so the bottom of the nozzle assembly is facing up.
• Remove bottom plate mounting screws and pull off the bottom plate from the nozzle assembly.
• Pull the beater bar up and disconnect the drive belt from the beater bar. Remove the beater bar from the nozzle assembly.
• Position the new beater bar in the nozzle assembly and slide the drive belt onto the beater bar. Install the new beater bar in the nozzle assembly.
• Position the bottom place on the nozzle assembly and reinstall the bottom plate mounting screws.
• Plug the vacuum cleaner in and check beater bar operation. Adjust the drive belt if necessary.