CONFIRM THE PART FITS
Dishwasher Pump and Motor Assembly W10482482
Part #W10482482
Part Information
This pump and motor assembly (part number WPW10482482) is for dishwashers.
Pump and motor assembly WPW10482482 pumps water through the spray arms during the dishwashing cycle.
Shut off the house circuit breaker for the dishwasher before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $57.69 |Â9% OFFÂ Phone Price : $63.69
- $205.72 |Â6% OFFÂ Phone Price : $217.72
- $8.34 |Â11% OFFÂ Phone Price : $9.34
- $36.04 |Â14% OFFÂ Phone Price : $42.04
- $35.74 |Â14% OFFÂ Phone Price : $41.74
- $22.13 |Â21% OFFÂ Phone Price : $28.13
- $62.14 |Â9% OFFÂ Phone Price : $68.14
- $51.11 |Â11% OFFÂ Phone Price : $57.11
- $30.22 |Â17% OFFÂ Phone Price : $36.22
- $90.08 |Â6% OFFÂ Phone Price : $96.08
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #7WDT770PAYM1 Whirlpool dishwasher | 7WDT770PAYM1 | Pump washarm and motor parts |
Model #WDF730PAYT5 Whirlpool dishwasher | WDF730PAYT5 | Pump washarm and motor parts |
Model #WDF730PAYB7 Whirlpool dishwasher | WDF730PAYB7 | Pump, washarm and motor parts |
Model #WDF730PAYT6 Whirlpool dishwasher | WDF730PAYT6 | Pump, washarm and motor parts |
Model #WDT770PAYM0 Whirlpool dishwasher | WDT770PAYM0 | Pump, washarm and motor parts |
Model #7WDT770PAYM0 Whirlpool dishwasher | 7WDT770PAYM0 | Pump washarm and motor parts |
Model #WDT770PAYB0 Whirlpool dishwasher | WDT770PAYB0 | Pump, washarm and motor parts |
Model #7WDT770PAYW4 Whirlpool dishwasher | 7WDT770PAYW4 | Pump, washarm and motor parts |
Model #WDF730PAYM6 Whirlpool dishwasher | WDF730PAYM6 | Pump, washarm and motor parts |
Model #7WDT770PAYM4 Whirlpool dishwasher | 7WDT770PAYM4 | Pump, washarm and motor parts |
Reviews
Buying a pump to replace a $.25 O ring!
I had to pay someone to come and install the pump. It's a crime that to replace a simple o ring, the entire pump assembly had to be purchased.
Former p, Baraboo, WI
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
A little different
The part had an extra 'port' which required my husband research it a bit to ensure it wouldn't leak. Otherwise, eeasy-peesey
Leeeeza, Delaware
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install!
It was easy to install. I worked maybe 30 minut. Great service!
Zkec, Derby, CT
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Pump replacement
Pretty easy install, fixed the problem and the machine is like new again!
Paul L T, NJ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Moderately easy to install
Need some good basic mechanical skills to perform this repair.
Woodie, Sarasota FL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Two people best
The part fixed my dishwasher that wouldn't cycle. It would fill and then drain and you could hear the motor trying to engage but couldn't start. Take careful notes of where the various wires connect. Also know your going to need the sensor from the sump and the impeller from the old unit. The unit installs from inside the dishware down, there's a little plastic post and notch alignment guide. The unit can be hard to seal up, make sure someone keeps unit in alignment and use your palm or maybe a rubber mallet to seat the gasket. Tight the toggle in sequence several times.
Chris121875, Cincinnati OH
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours