CONFIRM THE PART FITS
Part Information
This pad (part number 41P27400) is for buffer/polishers.
Pad 41P27400 sits at the base of the buffer/polisher and cushions the bonnet.
Follow the instructions in your owner's manual for installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #64610704 Craftsman home | 64610704 | Unit parts |
| Model #64610707 Kenmore floor scrubber | 64610707 | Unit parts |
| Model #646106990 Kenmore floor scrubber | 646106990 | Assembly diagram |
| Model #M4015 Waxcoa polisher | M4015 | Unit parts |
| Model #64610702 Craftsman home | 64610702 | Unit parts |
| Model #64610699 Kenmore floor scrubber | 64610699 | Unit parts |
| Model #64610690 Kenmore floor scrubber | 64610690 | Unit parts |
| Model #6461069902 Craftsman home | 6461069902 | Unit parts |
| Model #64624916 Craftsman home | 64624916 | Unit parts |
| Model #64610705 Kenmore floor scrubber | 64610705 | Unit parts |
Reviews
Replacement buffing pad 10" orbital buffer
Used a nut driver to align the base locking nut and the pad to the base platform for gluing. No instructions sent how to install pad or type of glue to use.
jlchew, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Difficult to install
The product was not a direct replacement for my 1975 vintage Sears Buffer/Polisher as indicated on the parts diagram found on the Sears wqeb page. the part was a manufacturers replacement part. This part did not come with the backer plate. To attach it to the backer plate I had to scrape off the old pad, remove the glue residue with xylene, and use contact cement to affix the new pad. I also removed backer plate from the unit to make it easier to center the new pad and clean the glue off the backer plate. This requires a screw driver to slip into the hole on the rim of backer plate to keep the plate from turning and a 1/2 socket to remove the attaching bolt. Ti is a left hand thread so turn it clockwise to loosen it. Xylene will disolve plastic so use it sparingly and wipe it off as soon as the glue is soft and can be scrapped off with a putty knife. I did a small area at a time. Also do this out side and stand with the wind at your back. Let the backer plate set for at least an hour outside to allow the xylene to completely evaporate. Quality of the pad seems quite good.
ACE210Cessna, Clifton Park, NY
6 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour