CONFIRM THE PART FITS
Water Heater Temperature and Pressure Relief Valve 19084-0150
Part #19084-0150
Part Information
This temperature and pressure relief valve (part number 19084-0150) is for water heaters.
Temperature and pressure relief valve 19084-0150 is a safety device that opens and releases pressure if the tank overheats.
Disconnect electrical power to the water heater and drain the tank below the level of the temperature and pressure relief valve before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #EE2H50HD045V American Water Heaters electric water heater | EE2H50HD045V | Water heater |
| Model #EE2H50RD055V American Water Heaters electric water heater | EE2H50RD055V | Water heater |
| Model #EE3Z80HD055V American Water Heaters electric water heater | EE3Z80HD055V | Water heater |
| Model #EE3J40RD045V American Water Heaters electric water heater | EE3J40RD045V | Water heater |
| Model #E6250L055S American Water Heaters electric water heater | E6250L055S | Water heater |
| Model #E6280H055DV American Water Heaters electric water heater | E6280H055DV | Water heater |
| Model #E2F30LS055V American Water Heaters electric water heater | E2F30LS055V | Water heater |
| Model #E6240H055DV American Water Heaters electric water heater | E6240H055DV | Water heater |
| Model #E6240L055S American Water Heaters electric water heater | E6240L055S | Water heater |
| Model #E6265H055DV American Water Heaters electric water heater | E6265H055DV | Water heater |
Reviews
Easy to install and was right one
Took only 10 minutes but need a man to unscrew it. I paid extra for same generic part becasue I got it through Sears because I wanted a guarantee it would fit.
cherry, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Easy Peasy
Vey simple repair, 1. Shut off electrical breaker. 2. Shut off water supply to the hot water tank. 3. Drained off excess water at old relief valve into a bucket. 4. Unscrewed old relief with large crescent wrench. 5. Applied thread tape to new valve and installed. 6. Ran hot water for 2 minutes before restoring electrical power. Took about 15 minutes.
Jefferson, Wagoner, Ok
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
High price
The part did not fit as the threaded area was too short. This was remedied with an adapter. It should have fit without the extra fitting.
soberdoc, rural East Texas
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Didn't Fit
Ordered by model # but doesn't fit. Requires a 3 1/2 reach, they sent a 3 inch.
Doug68, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Perfect fit
Cut out plastic cover and foam insulation. Easily unscrewed with a money wrench. No torch required.
Cambridge D, Cambridge, MA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour