$19.56 |
9% OFF Phone Price : $21.56
CONFIRM THE PART FITS
Part Information
This impeller shaft (part number 917-04126) is for snowblowers.
Impeller shaft 917-04126 rotates the auger shaft when turned by the impeller pulley.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $21.16 |22% OFF Phone Price : $27.16
- $74.45 |7% OFF Phone Price : $80.45
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247985380 Craftsman gas snowblower | 247985380 | Auger & housing |
| Model #24788173 Craftsman gas snowblower | 24788173 | Auger & housing |
| Model #31A-62BD799 MTD gas snowblower | 31A-62BD799 | Auger housing |
| Model #31AS53SF793 MTD gas snowblower | 31AS53SF793 | Auger & housing |
| Model #247985370 Craftsman gas snowblower | 247985370 | Auger & housing |
| Model #31AH54SG793 MTD gas snowblower | 31AH54SG793 | Auger & housing |
| Model #247887910 Craftsman gas snowblower | 247887910 | Auger/housing |
| Model #31AS63EE793 MTD gas snowblower | 31AS63EE793 | Auger & housing |
| Model #247886910 Craftsman gas snowblower | 247886910 | Auger/housing |
| Model #31AH64FG731 MTD gas snowblower | 31AH64FG731 | Auger & housing |
Reviews
Snowblower impeller shaft replacement
part arrive on time and fit. installation was 5 out of 10. just takes time to remove the impeller mechanism and separate and clean all the parts before reassembling. I do recommend replacing the other gear, and all the parts in the housing while you have it all apart. I did not the first time and I wasted time having to do it all again. I did not replace the axle or blades but replaced the rest. about $150 in all including this impeller shaft
PaulNY, NY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Requires significant dis-assembly, but fit properl
Repairing snowblower, all of the parts fit, but the link to find out about the status of the additional part I still need doesn't work.
Bill, Ohio
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Quality Original replacement parts
It was a fairly straight forward process to replace this part. I don't know if it was 100% necessary as the bull gear is brass and showed the most wear.
Gerry, Massachusetts
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
I needed to replace the brass gear that turns the auger assembly in my snowblower. When I opened the gear box I found wear on the worm gear shaft so I decided to replace it as well. The repair was easy once the auger assembly was removed from the blower. When installing the new worm gear shaft, remember to pack the gear box with a good silicone based lubricant that is good to low temperatures.
Kevin, Hartford, CT
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Auger gear, worm shaft & auger belt
Auger gear appears to be cast bronze. Teeth can be easily stripped. Worm shaft replicates the original. Belt was not ribbed as the original. Required adjusting the auger control.
LH50, Hayden, ID
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour